Cassese MACH5 Electronic Underpinner

Cassese MACH5 Electronic Underpinner

• High production capacity : Very fast! up to 3360 corners per hour (2 positions per corner)
• Computerised touch screen interface: Simple and user friendly, informing the operator which wedges and accessories to use for each profile.
• Programmable and motorized joining table: Automatically self-positions according to pre-programmed moulding widths
• Save up to 3000 moulding profiles into the programmable memory
• Up to 9 programmable wedge positions: with up to 9 wedges in each position.
• Limitless joining capacity: The MACH5 CART offers a wider stroke of 190mm and 110mm height top clamp to meet all frame joining requirements.
• Powerful Ultra Double-action « push and tighten » rebate clamp: Position one of the moulding pieces up to the guide, then lay the second piece roughly place. The special action of the clamps draws them accurately and firmly together. Indeed, the clamps literally bite into the rebate of the 2 pieces of mouldings to pull and tighten them very strongly against each other (100kg pressure!). This ensures a high quality join every time, even on very wide mouldings. This patented system is unique to Cassese.
• No tools required to change wedge sizes: Uses only genuine Cassese patented cartridge wedges. They are colour coded with a full range of sizes available (5,7,10,12,&15) most available in hardwood and softwood versions. Quality and performance!
• Two stage pneumatic foot-pedal: allowing operator to clamp and check the join, before inserting the wedge.
• Smart Wedge-Drive System: Allows for perfect alignment of wedge firing, and perfect pressure for joining any timber hardness, with no need to manually adjust pressure for different timber types!
• Built-in air regulator
• Barcode scanning capability: Built in networking capabilities to read and set up barcodes. (Optional scanner & software required)