Kool Tack Regular 40x60 5mm (box25)
Stock Code.
TKT4060-16
- Contact our team for more information on this product
KoolTack Heat Activated Foamboards have a prepared surface of heat activated adhesive ready to accept an image once heat is applied. KoolTack offers a quick and efficient mounting option for those with a Hot Press Heat Vacuum Press, with a dry mount adhesive that activates at 65° C to 70° C in 15 to
Already in basket
Description
KoolTack Heat Activated Foamboards have a prepared surface of heat activated adhesive ready to accept an image once heat is applied. KoolTack offers a quick and efficient mounting option for those with a Hot Press Heat Vacuum Press, with a dry mount adhesive that activates at 65° C to 70° C in 15 to 20 seconds. HELPFUL TIP! - Using Kool Tack Heat Activated Foamboards 1. Make sure your dry mount board and print are clean and free of dust and dirt. 2. When first starting up your press from a cold start, let it cycle at least 2 to 3 times in order for the temperature to stabilize and distribute evenly over the platen of the press. 3. For thick prints, set the speed to slow, this allows the heat to penetrate through the thick paper, into the adhesive. 4. When dry mounting is complete, take it out of the press and let it cool. This gives the adhesive time to bond. 5. When dry mounting photographs, never adjust the temperature over 76°C for this could damage the emulsion on the surface of the photograph. ( use Perma Lon* sheet when dry mounting photographs to eliminate “orange peel” ).
Specifications
Colour | -1 |
Item Width (mm) | 40 |
Certification Body | Pending |
Bulk UOM Qty | 25 |
55x35 Natural Beech Float
Stock Code.
1908BEECH
M-Tork Paper Towels 320m Roll
Stock Code.
TORKEA
Epson Ink 700ml Lt Grey SCP10070/20070
Stock Code.
EPINK809LG
Corner Mounts 32mm (pk250)
Stock Code.
CXDSUPPCR0844